Quest For Sound - High End Audio

Zamp v.3 - Fully Discrete 45W x 2 Amplifier continues Parasound's proven amplifier design to give you stellar reliability, amazing sound quality, and plenty of power, all in a small package. Whether you use it as a zone amplifier or the centerpiece of a mini-component system, this full featured amplifier will exceed your expections.

45 watts per channel into 8 O
60 watts per channel into 4 O
90 watts bridged into 8 O mono
Fully discrete circuitry with Toroid power transformer
Low heat design
Headphone jack
Indicators for AC present and channel operating status
Automatic on/off by 9 - 12 V trigger
Automatic on/off by audio signal with adjustable sensitivity
Level controls for each channel; ground lift switch
Gold-plated RCA input jacks and looping line output jacks
5-way speaker terminals
Unique half-rack width chassis; 1 rack space high
Fastening hardware available for rack mounting
Parasound 2 year parts, 2 years labor warranty
(For USA and Canada purchases only)

        Supports Incoming Digital Word Lengths:
        16 bit - 24 bit

        Supports Incoming Digital Sampling Frequencies:
        Opt & Coax: 8 kHz, 11.025 kHz, 16 kHz, 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz.
        USB: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz

        USB Streaming Controller:
        Texas Instruments TAS1020B

        Upsampling Frequency:
        422 kHz / 24 bit (all inputs)

        Sample Rate Converter:
        Analog Devices AD1895

        D to A Converter:
        Analog Devices AD1853

        Frequency Response:
        20 Hz to 20 kHz ±0.2 dB

        Channel Balance:
        < 0.05 dB, 20 Hz - 20 kHz

        Channel Separation:
        > 95 dB, 20 Hz - 20 kHz

        Signal to Noise Ratio:
        110 dB, A-weighted

        THD + Noise:
         < 0.015 %

        Audio Output Level:
        Unbalanced: 2.1 V RMS (Balanced: 4.2 V RMS)

        Output Impedance:
          Line out: 160 ohms, balanced or unbalanced
          Headphone out: 10 ohms

        AC Power Requirement: 10 watts
         110-130 VAC 60 Hz or 220-240 VAC 50 Hz, voltage is selected on the chassis bottom

        Dimensions:
         Width: 9.5" - 241 mm (black); 8.5" - 220 mm (silver)
         Depth: 10" - 254 mm
         Height, with feet: 2" - 51 mm; without feet:1.75"- 45 mm

        Weight:
         Net: 5 lbs (2.3kg) / Shipping: 8 lbs (3.7kg)

        Rack Mount Accessory (Black Zdac only):
          SBS: Side by Side Mounting bracket, purchased separately
          Zblank: Panel extender, purchased separately
         (Silver Zdacs cannot be rack mounted)